PP Filters
Melt blown polypropylene cartridges are manufactured from 100 percent pure polypropylene fibres. These cartridges are designed for turbidity, sediment, suspended matter removal, providing water purity. These cartridges will not cause any water tastes, odors or color when used within the required temperature range. Melt blown filters structure this company consists of three layers are that each layer has porous 3D.
Products PP Filters
PP Water Treatment Filter
Melt blown fiber diameter forming this layers from outside to inside is variable that the result it will be fluid filtration as step, absorption capacity most of the particles and long service life.
The filters according to customer requirement In the case of the washer and cap also are produced.
Benefits and features
- High filtration power of fiber filters produced with Bellon Nation technology
- High storage capacity of pollutants due to the three-dimensional pores of the filter layers
- Three-layer structure of 100% polypropylene cartridge for compatibility with a wide range of fluid processes
- Low pressure drop
- Lack of taste and smell in water
- Use of Food grade raw materials
- Created from thermal bands without the use of any coatings or adhesives
- No fiber separation
- High chemical resistance against fluids, chemicals and acids
- Complies with FDA requirements
- Use welding to connect the caps and do not use thermal adhesives
Applications
- Pre-filter for water treatment systems
- Water filtration of cooling systems in semiconductor industries
- Low and medium concentration chemical fluid filtration
- Water filtration for production processes and recycling of water used by factories
- Filtration in the painting industry
- Food and pharmaceutical industries
- Solvent and chemical production industries ٬ Petrochemicals and power plants
Slim PP purification filter
Slim pp purification filter is a cartridge type and is used as a first stage sediment filter for semi-industrial slimming housing in water purifiers. This filter is made of propylene fibers. The structure of Slim Fiber Water Purifier Filter is designed and constructed in such a way that larger particles are trapped in the outer parts of the filter and smaller particles in the inner parts of the filter. In fact, it should be said that the density of the fiber filter increases from the outer surface to the inner surface. This type of water filters are produced in simple, needle, grooved and capped models and in sizes of 10 inches to 50 inches for different uses.
Semi-industrial PP filter
Jumbo pp filter is produced in precision of 5 microns and one micron and is usually installed in the first filter chamber of semi-industrial water purifier, industrial water purifier and all kinds of pretreatment and water sediment traps and removes sand, mud, sludge. , Algae, soil, rusty pipes, sediments and physical particles of water.